ZONE OFFROAD | 6" Lift Kit | 09-13 Dodge Ram 2500/3500 4WD | Diesel | ZOND134F / ZOND134N / ZOND37F / ZOND37N

ZONE OFFROAD | 6" Lift Kit | 09-13 Dodge Ram 2500/3500 4WD | Diesel

Lift Height: 6"

Position: Front and Rear

Configurations

• 3-1/2 Inch Axle / FOX 2.0 Adventure Series — ZOND134F
• 3-1/2 Inch Axle / Nitro Series — ZOND134N
• 4 Inch Axle / FOX 2.0 Adventure Series — ZOND37F
• 4 Inch Axle / Nitro Series — ZOND37N

Installation requirements

1. This truck was produced using rear axles of differing diameters; measure the diameter of your rear axle to ensure proper kit selection in configuration.
2. Although rare, if you experience front driveline vibration, install the optional transfer case indexing ring.
3. This kit is not designed for dually models, but may me easily adapted to accommodate your truck. Please contact customer support and they will help you find a solution.
4. Gas models may require modification to the front exhaust crossover pipe on driver side when using the transfer case indexing ring.
5. Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.
6. Adding larger-than-stock wheels? Add front bumper spacers to your kit for additional clearance as some wheel / tire combos may not fully clear the bumper's stock location.
7. Works on 2013 2500 with 4 link front suspension only.
8. Will not fit 1 Ton Trucks.

Vehicle fitment

Applications below are subject to the manufacturer restrictions shown first.

1. This truck was produced using rear axles of differing diameters; measure the diameter of your rear axle to ensure proper kit selection in configuration.
2. Although rare, if you experience front driveline vibration, install the optional transfer case indexing ring.
3. This kit is not designed for dually models, but may me easily adapted to accommodate your truck. Please contact customer support and they will help you find a solution.
4. Gas models may require modification to the front exhaust crossover pipe on driver side when using the transfer case indexing ring.
5. Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.
6. Adding larger-than-stock wheels? Add front bumper spacers to your kit for additional clearance as some wheel / tire combos may not fully clear the bumper's stock location.
7. Works on 2013 2500 with 4 link front suspension only.
8. Will not fit 1 Ton Trucks.

• 2013 Ram / 2500 / Big Horn / Drive: 4WD / Fuel: DIESEL — Front and Rear
• 2012–2013 Ram / 2500 / Laramie / Drive: 4WD / Fuel: DIESEL — Front and Rear
• 2012–2013 Ram / 2500 / Laramie Longhorn / Drive: 4WD / Fuel: DIESEL — Front and Rear
• 2013 Ram / 2500 / Lone Star / Drive: 4WD / Fuel: DIESEL — Front and Rear
• 2013 Ram / 2500 / Outdoorsman / Fuel: DIESEL — Front and Rear
• 2012 Ram / 2500 / Outdoorsman / Drive: 4WD / Fuel: DIESEL — Front and Rear
• 2012–2013 Ram / 2500 / SLT / Drive: 4WD / Fuel: DIESEL — Front and Rear
• 2012–2013 Ram / 2500 / ST / Drive: 4WD / Fuel: DIESEL — Front and Rear
• 2013 Ram / 2500 / SXT / Drive: 4WD / Fuel: DIESEL — Front and Rear
• 2013 Ram / 2500 / Tradesman / Drive: 4WD / Fuel: DIESEL — Front and Rear
• 2012 Ram / 3500 / Drive: 4WD / Fuel: DIESEL — Front and Rear

Manufacturer specifications by option

ZOND134F

• Front Lift Method : Coil Spring
• Front Lift Height : 6"
• Rear Lift Method : Block
• Rear Lift Height : 4"
• Shocks Included : Yes

ZOND134N

• Front Lift Method : Coil Spring
• Front Lift Height : 6"
• Rear Lift Method : Block
• Rear Lift Height : 4"
• Shocks Included : Yes

ZOND37F

• Front Lift Method : Coil Spring
• Front Lift Height : 6"
• Rear Lift Method : Block
• Rear Lift Height : 4"
• Shocks Included : Yes

ZOND37N

• Front Lift Method : Coil Spring
• Front Lift Height : 6"
• Rear Lift Method : Block
• Rear Lift Height : 4"
• Shocks Included : Yes