ZONE OFFROAD | 5" Lift Kit | 10-13 Dodge Ram 2500/3500 4WD | ZOND16F / ZOND16N / ZOND18F / ZOND18N

ZONE OFFROAD | 5" Lift Kit | 10-13 Dodge Ram 2500/3500 4WD

Lift Height: 5"

Position: Front and Rear

Configurations

• 3-1/2 Inch Axle / FOX 2.0 Adventure Series — ZOND16F
• 3-1/2 Inch Axle / Nitro Series — ZOND16N
• 4 Inch Axle / FOX 2.0 Adventure Series — ZOND18F
• 4 Inch Axle / Nitro Series — ZOND18N

Installation requirements

1. Will work with Power Wagon models with the addition of sway bar link kit D5301.
2. Power Wagon models came factory with a 2" taller ride height, so net lift gain will be 3" over stock.
3. This truck was produced using rear axles of differing diameters; measure the diameter of your rear axle to ensure proper kit selection in configuration.
4. Factory wheels fit when paired with factory / original equipment tire size.
5. This kit is not designed for dually models, but may me easily adapted to accommodate your truck. Please contact customer support and they will help you find a solution.
6. Gas Engine? Gas models may sit slightly taller than the advertised lift height due to lighter weight of engine.
7. These trucks are typically between 1" and 3" tail high from the factory. Please measure your trucks factory front-to-back ride height and order the rear lift height to achieve the desired stance. If closer to 1" tail high from the factory order the 5" rear coils for a more level stance. If closer to 3" tail high from the factory order the 3" rear coils for a more level stance.
8. This truck was produced with different rear axles. Be sure to measure the diameter of your rear axle before ordering.
9. Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift drive-line angles and avoid / eliminate driveshaft vibration.

Vehicle fitment

Applications below are subject to the manufacturer restrictions shown first.

1. Will work with Power Wagon models with the addition of sway bar link kit D5301.
2. Power Wagon models came factory with a 2" taller ride height, so net lift gain will be 3" over stock.
3. This truck was produced using rear axles of differing diameters; measure the diameter of your rear axle to ensure proper kit selection in configuration.
4. Factory wheels fit when paired with factory / original equipment tire size.
5. This kit is not designed for dually models, but may me easily adapted to accommodate your truck. Please contact customer support and they will help you find a solution.
6. Gas Engine? Gas models may sit slightly taller than the advertised lift height due to lighter weight of engine.
7. These trucks are typically between 1" and 3" tail high from the factory. Please measure your trucks factory front-to-back ride height and order the rear lift height to achieve the desired stance. If closer to 1" tail high from the factory order the 5" rear coils for a more level stance. If closer to 3" tail high from the factory order the 3" rear coils for a more level stance.
8. This truck was produced with different rear axles. Be sure to measure the diameter of your rear axle before ordering.
9. Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift drive-line angles and avoid / eliminate driveshaft vibration.

• 2013 Ram / 2500 / Big Horn / Drive: 4WD — Front and Rear / 5"
• 2012–2013 Ram / 2500 / Laramie / Drive: 4WD — Front and Rear / 5"
• 2012–2013 Ram / 2500 / Laramie Longhorn / Drive: 4WD — Front and Rear / 5"
• 2013 Ram / 2500 / Lone Star / Drive: 4WD — Front and Rear / 5"
• 2013 Ram / 2500 / Outdoorsman — Front and Rear / 5"
• 2012 Ram / 2500 / Outdoorsman / Drive: 4WD — Front and Rear / 5"
• 2012–2013 Ram / 2500 / Power Wagon — Power Wagon models net 3in over stock height / Front and Rear / 5"
• 2012–2013 Ram / 2500 / SLT / Drive: 4WD — Front and Rear / 5"
• 2012–2013 Ram / 2500 / ST / Drive: 4WD — Front and Rear / 5"
• 2013 Ram / 2500 / SXT / Drive: 4WD — Front and Rear / 5"
• 2013 Ram / 2500 / Tradesman / Drive: 4WD — Front and Rear / 5"
• 2012–2013 Ram / 3500 / Drive: 4WD — Front and Rear / 5"

Manufacturer specifications by option

ZOND16F

• Front Lift Method : Coil Spring
• Front Lift Height : 5"
• Rear Lift Method : Block
• Rear Lift Height : 3"
• Shocks Included : Yes

ZOND16N

• Front Lift Method : Coil Spring
• Front Lift Height : 5"
• Rear Lift Method : Block
• Rear Lift Height : 3"
• Shocks Included : Yes

ZOND18F

• Front Lift Method : Coil Spring
• Front Lift Height : 5"
• Rear Lift Method : Block
• Rear Lift Height : 3"
• Shocks Included : Yes

ZOND18N

• Front Lift Method : Coil Spring
• Front Lift Height : 5"
• Rear Lift Method : Block
• Rear Lift Height : 3"
• Shocks Included : Yes