BDS SUSPENSION | 6" Lift Kit with Radius Arm Diesel | 19-24 Ram 2500 4WD | 1736FS / 1736H
BDS SUSPENSION | 6" Lift Kit with Radius Arm Diesel | 19-24 Ram 2500 4WD | 1736FS / 1736HPART#: PART#: BDS1736H
Couldn't load pickup availability
Canadian Owned & Operated
BDS SUSPENSION | 6" Lift Kit with Radius Arm Diesel | 19-24 Ram 2500 4WD | 1736FS / 1736H
Description
Take your rear air ride equipped RAM 2500 diesel powered truck to the next level with this 6-inch radius arm lift kit from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37" tires.
Up front the lift kit includes diesel-specific Pro-Ride coil springs, heavy-duty replacement radius arms, forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, brake line brackets and precision tuned NX2 or FOX 2.0 nitrogen charged shocks.
At this height, the transfer case needs to be indexed to allow use of the factory front driveshaft so an indexing ring and new transmission crossmember are supplied. In the rear this kit utilizes heavy duty air bag spacers, track bar relocation bracket to correct axle positioning, bump stop extensions, sway bar links and a matching set of NX2 Nitro or FOX 2.0 Performance shocks.
HD Radius Arms
In place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smooth, quiet, service-free operation.
Pro-Ride Coil Springs
A pair of full-length, diesel-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains. Manufactured from high tensile steel, our direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.
Steering Correction
To optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.
FOX 2.0 Performance Series — BDS1736FS
- Front Lift Method : Coil Spring
- Front Lift Height : 6"
- Rear Lift Method : Spacer
- Rear Lift Height : 5"
- Shocks Included : Yes
- Lift Height : 6-7.5"
NX2 Nitro Series — BDS1736H
- Front Lift Method : Coil Spring
- Front Lift Height : 6"
- Rear Lift Method : Spacer
- Rear Lift Height : 5"
- Shocks Included : Yes
- Lift Height : 6-7.5"
Supplemental Installation Documents
Estimated installation time: 10 hrs.
Installation difficulty: Moderate.
Special tools: Pitman Arm Puller.
Fitment Table
FOX 2.0 Performance Series — BDS1736FS
| Year | Make | Model | Trim | Drive | Fuel |
|---|---|---|---|---|---|
| 2019–2024 | Ram | 2500 | Big Horn | 4WD | DIESEL |
| 2019–2024 | Ram | 2500 | Laramie | 4WD | DIESEL |
| 2019–2020 | Ram | 2500 | Laramie Limited | 4WD | DIESEL |
| 2019–2021 | Ram | 2500 | Laramie Longhorn | 4WD | DIESEL |
| 2019–2024 | Ram | 2500 | Limited | 4WD | DIESEL |
| 2019–2024 | Ram | 2500 | Lone Star | 4WD | DIESEL |
| 2019–2024 | Ram | 2500 | Tradesman | 4WD | DIESEL |
| 2021–2024 | Ram | 2500 | Limited Longhorn | 4WD | DIESEL |
NX2 Nitro Series — BDS1736H
| Year | Make | Model | Trim | Drive | Fuel |
|---|---|---|---|---|---|
| 2019–2024 | Ram | 2500 | Big Horn | 4WD | DIESEL |
| 2019–2024 | Ram | 2500 | Laramie | 4WD | DIESEL |
| 2019–2020 | Ram | 2500 | Laramie Limited | 4WD | DIESEL |
| 2019–2021 | Ram | 2500 | Laramie Longhorn | 4WD | DIESEL |
| 2019–2024 | Ram | 2500 | Limited | 4WD | DIESEL |
| 2019–2024 | Ram | 2500 | Lone Star | 4WD | DIESEL |
| 2019–2024 | Ram | 2500 | Tradesman | 4WD | DIESEL |
| 2021–2024 | Ram | 2500 | Limited Longhorn | 4WD | DIESEL |
| 2023–2024 | Ram | 2500 | Rebel | Not specified | DIESEL |
Important fitment notes
- Fits OE equiped Air Ride systems only
- Will not fit rear coil-spring equipped models
- Fits diesel models only
- Models with two piece driveshafts may experience vibrations, add on a carrier bearing drop to improve driveline angles.
- Trucks with equipped with manual shift T-case will require Transfer Case Shifter Extension - BDS122422.
Warranty
BDS warranty coverage is for the original retail purchaser with proof of purchase. BDS hard parts and bushings have lifetime replacement coverage; finish and normal wear are excluded.
BDS NX2 and BDS/FOX Performance Series shocks have limited lifetime coverage excluding normal wear and oil seals. At BDS’s discretion, qualifying leaking seals less than two years old may be considered for repair or replacement.
FOX proprietary shocks and coilovers follow FOX warranty terms rather than the BDS warranty. Qualifying leaking seals less than one year old may be considered; other FOX concerns follow the FOX service process.
Properly maintained ball joints and tie-rod ends less than three years old may qualify, subject to the manufacturer’s conditions.
Remedies are repair or replacement at BDS’s discretion. Eligible warranty ground shipping is covered; removal, installation, expedited freight and consequential costs are excluded.
Shipping & Returns
Shipping & Refund Policy
Shipping:
We ship across Canada. Orders are processed within 1–2 business days. Delivery within Canada typically takes 3–10 business days depending on location and carrier. Tracking information will be provided once your order ships.
Refunds & Returns:
Returns are accepted within 30 days of delivery. Items must be unused and in original packaging. Please review our full return policy for more details.
Damaged or Incorrect Items:
If you receive a damaged or incorrect item, please contact us within 5 days of delivery. Call or text 416-624-1357 or email sales@Niagarajeeps.ca so we can resolve the issue quickly.