BDS SUSPENSION | 6.5" Lift Kit | 20-26 Chevrolet Silverado 2500HD / 20-26 GMC Sierra 2500HD / 20-26 GMC Sierra 3500HD 4WD | 753FS / 753H / 756FS / 756H

5 Inch Block Kit Without Overload / FOX 2.0 Performance Series — BDS753FS

5 Inch Block Kit Without Overload / NX2 Nitro Series — BDS753H

5 Inch Block Kit With Overload / FOX 2.0 Performance Series — BDS756FS

5 Inch Block Kit With Overload / NX2 Nitro Series — BDS756H

Important fitment notes

1. For DRW models, use the w/ overload rear lift option
2. Requires frame bracket modification.
3. Torsion Bar Tool required to load/unload torsion bars, The GM specified tool is #CH48809.
4. Models with two-piece rear driveshafts will require a carrier bearing drop kit.
5. Factory 17-18" wheels cannot be reinstalled due to tie rod end interference, stock 20" wheels can be reinstalled with up to a 35x12.50 tire.
6. In some cases vehicles used in 4WD on the highway regularly could potentially experience a minor front driveline vibration. If this occurs we recommend replacing the front driveshaft with a dual Cardan style driveshaft.
7. Do not install this suspension system in conjunction with any type of torsion bar lift keys to achieve more that tested 6.5" lift height.
8. Some minor trim will be required with certain wheel/tire combination. This is normal with most aftermarket tire/wheel fitment on Chevy/GM trucks. Trimming will normally included the bottom edge of the inner fender shrouds and/or lower corner of front bumper valance. As a rule of thumb, deeper backspacing and shorter/narrower tires will reduce/eliminate trimming required.
9. Will NOT work with AT4X or ZR2 models, lower control arm profile is different
10. When combining the Recoil traction bars (BDS2300) with a 6.5” suspension lift kit and your truck does NOT have a top mounted overload (BDS753 kit variants), 15.5” long U-bolts are provided. Longer U-bolts will be needed to install the traction bars. Please purchase UBT4200 (X4) to mount the traction bars to your vehicle.

BDS warranty coverage is for the original retail purchaser with proof of purchase. BDS hard parts and bushings have lifetime replacement coverage; finish and normal wear are excluded.

BDS NX2 and BDS/FOX Performance Series shocks have limited lifetime coverage excluding normal wear and oil seals. At BDS’s discretion, qualifying leaking seals less than two years old may be considered for repair or replacement.

FOX proprietary shocks and coilovers follow FOX warranty terms rather than the BDS warranty. Qualifying leaking seals less than one year old may be considered; other FOX concerns follow the FOX service process.

Properly maintained ball joints and tie-rod ends less than three years old may qualify, subject to the manufacturer’s conditions.

Remedies are repair or replacement at BDS’s discretion. Eligible warranty ground shipping is covered; removal, installation, expedited freight and consequential costs are excluded.

Read the official BDS warranty and FOX service terms.