BDS SUSPENSION | 4" Lift Kit with 4-Link Gas | 19-24 Ram 3500 4WD | 1723FS / 1723H
BDS SUSPENSION | 4" Lift Kit with 4-Link Gas | 19-24 Ram 3500 4WD | 1723FS / 1723HPART#: PART#: BDS1723FS
Couldn't load pickup availability
Canadian Owned & Operated
BDS SUSPENSION | 4" Lift Kit with 4-Link Gas | 19-24 Ram 3500 4WD | 1723FS / 1723H
Description
Raise your RAM 3500 with factory rear air bags truck to next heights with this 6-inch radius arm lift kit from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37" tires.
Up front the lift kit includes Pro-Ride coil springs, heavy-duty replacement radius arms, forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, brake line brackets and precision tuned NX2 or FOX 2.0 nitrogen charged shocks.
At this height, the transfer case needs to be indexed to allow use of the factory front driveshaft so an indexing ring and new transmission crossmember are supplied. In the rear this kit utilizes a high-strength steel lift block, heavy duty air bag spacer, longer u-bolts and a matching set of NX2 Nitro or FOX 2.0 Performance shocks.
HD Radius Arms
In place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smooth, quiet, service-free operation.
Pro-Ride Coil Springs
A pair of full-length progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.
Steering Correction
To optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.
FOX 2.0 Performance Series — BDS1723FS
- Front Lift Method : Coil Spring
- Front Lift Height : 4"
- Rear Lift Method : Block
- Rear Lift Height : 3"
- Shocks Included : Yes
- Lift Height : 4-5.5"
NX2 Nitro Series — BDS1723H
- Front Lift Method : Coil Spring
- Front Lift Height : 4"
- Rear Lift Method : Block
- Rear Lift Height : 3"
- Shocks Included : Yes
- Lift Height : 4-5.5"
Supplemental Installation Documents
Estimated installation time: 7-9 hrs.
Installation difficulty: Difficult.
Special tools: Cut Off Wheel or Equiv., Welding Equipment.
Fitment Table
FOX 2.0 Performance Series — BDS1723FS
| Year | Make | Model | Trim | Drive | Fuel |
|---|---|---|---|---|---|
| 2019–2023 | Ram | 3500 | Not specified | 4WD | GAS |
| 2024 | Ram | 3500 | Big Horn | 4WD | GAS |
| 2024 | Ram | 3500 | Laramie | 4WD | GAS |
| 2024 | Ram | 3500 | Limited | 4WD | GAS |
| 2024 | Ram | 3500 | Limited Longhorn | 4WD | GAS |
| 2024 | Ram | 3500 | Tradesman | 4WD | GAS |
NX2 Nitro Series — BDS1723H
| Year | Make | Model | Trim | Drive | Fuel |
|---|---|---|---|---|---|
| 2019–2023 | Ram | 3500 | Not specified | 4WD | GAS |
| 2024 | Ram | 3500 | Big Horn | 4WD | GAS |
| 2024 | Ram | 3500 | Laramie | 4WD | GAS |
| 2024 | Ram | 3500 | Limited | 4WD | GAS |
| 2024 | Ram | 3500 | Limited Longhorn | 4WD | GAS |
| 2024 | Ram | 3500 | Tradesman | 4WD | GAS |
Important fitment notes
- Fits OE equipped air ride systems only
- Exhaust modification is required to clear the front driveshaft. The vehicle can be driven w/o a front driveshaft to an exhaust shop.
- Vehicles equipped with a Manual T-case, requires BDS122422 Manual transfer case shifter extension.
- Vehicles equipped with a 2-piece rear drive shaft (carrier bearing), require BDS122406 Carrier bearing drop.
Warranty
BDS warranty coverage is for the original retail purchaser with proof of purchase. BDS hard parts and bushings have lifetime replacement coverage; finish and normal wear are excluded.
BDS NX2 and BDS/FOX Performance Series shocks have limited lifetime coverage excluding normal wear and oil seals. At BDS’s discretion, qualifying leaking seals less than two years old may be considered for repair or replacement.
FOX proprietary shocks and coilovers follow FOX warranty terms rather than the BDS warranty. Qualifying leaking seals less than one year old may be considered; other FOX concerns follow the FOX service process.
Properly maintained ball joints and tie-rod ends less than three years old may qualify, subject to the manufacturer’s conditions.
Remedies are repair or replacement at BDS’s discretion. Eligible warranty ground shipping is covered; removal, installation, expedited freight and consequential costs are excluded.
Shipping & Returns
Shipping & Refund Policy
Shipping:
We ship across Canada. Orders are processed within 1–2 business days. Delivery within Canada typically takes 3–10 business days depending on location and carrier. Tracking information will be provided once your order ships.
Refunds & Returns:
Returns are accepted within 30 days of delivery. Items must be unused and in original packaging. Please review our full return policy for more details.
Damaged or Incorrect Items:
If you receive a damaged or incorrect item, please contact us within 5 days of delivery. Call or text 416-624-1357 or email sales@Niagarajeeps.ca so we can resolve the issue quickly.