BDS SUSPENSION | 4" Lift Kit with 4-Link Diesel | 14-18 Ram 2500 4WD | 1632FS / 1632H
BDS SUSPENSION | 4" Lift Kit with 4-Link Diesel | 14-18 Ram 2500 4WD | 1632FS / 1632HPART#: PART#: BDS1632H
Couldn't load pickup availability
Canadian Owned & Operated
BDS SUSPENSION | 4" Lift Kit with 4-Link Diesel | 14-18 Ram 2500 4WD | 1632FS / 1632H
Description
Built to outperform, BDS Suspension engineered a 4-inch lift kit with 4-Link conversion for your 2014-2018 RAM 2500 diesel powered truck that will surely impress. Works on trucks with factory rear air ride option. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 35" tires.
Up front the lift kit includes diesel-specific Pro-Ride coil springs, 4-Link control arms with conversion mounts, forged drop pitman arm and track bar bracket for steering correction, bump stops, brake line brackets and precision tuned NX2 or FOX 2.0 nitrogen charged shocks.
In the rear this kit utilizes heavy duty air bag spacers, track bar relocation bracket to correct axle positioning, bump stop extensions, sway bar links and a matching set of NX2 Nitro or FOX 2.0 Performance shocks. BDS also supplies new air ride leveling sensor brackets to re-position the ride height sensors allowing it to perform just like it does at factory ride height and maintain full air bag range of motion.
4-Link Conversion
Convert the factory stamped steel radius arms over to the BDS 4-link to optimize suspension geometry for better handling characteristics while adding strength and stability. This bolt-on upgrade utilizes high-strength 1/4-inch steel brackets that allow mounting of HD upper and lower control arms to correct axle positioning while limiting caster change throughout wheel travel.
Pro-Ride Coil Springs
A pair of full-length, diesel-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains. Manufactured from high tensile steel, our direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.
Steering Correction
To optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.
FOX 2.0 Performance Series — BDS1632FS
- Front Lift Method : Coil Spring
- Front Lift Height : 4"
- Rear Lift Method : Spacer
- Rear Lift Height : 3-5"
- Shocks Included : Yes
- Lift Height : 4-5.5"
NX2 Nitro Series — BDS1632H
- Front Lift Method : Coil Spring
- Front Lift Height : 4"
- Rear Lift Method : Spacer
- Rear Lift Height : 3-5"
- Shocks Included : Yes
- Lift Height : 4-5.5"
Supplemental Installation Documents
Estimated installation time: 6-8 hrs.
Installation difficulty: Moderate.
Special tools: Step Drill Bit, Drill / Bit Set, Pitman Arm Puller, Welding Equipment.
Fitment Table
FOX 2.0 Performance Series — BDS1632FS
| Year | Make | Model | Trim | Drive | Fuel |
|---|---|---|---|---|---|
| 2014–2018 | Ram | 2500 | Big Horn | 4WD | DIESEL |
| 2014–2018 | Ram | 2500 | Laramie | 4WD | DIESEL |
| 2014–2018 | Ram | 2500 | Laramie Limited | 4WD | DIESEL |
| 2014–2018 | Ram | 2500 | Laramie Longhorn | 4WD | DIESEL |
| 2014–2015 | Ram | 2500 | Lone Star | 4WD | DIESEL |
| 2014–2018 | Ram | 2500 | Outdoorsman | Not specified | DIESEL |
| 2014–2018 | Ram | 2500 | SLT | 4WD | DIESEL |
| 2014–2018 | Ram | 2500 | ST | 4WD | DIESEL |
| 2014–2018 | Ram | 2500 | Tradesman | 4WD | DIESEL |
| 2016–2018 | Ram | 2500 | Limited | 4WD | DIESEL |
NX2 Nitro Series — BDS1632H
| Year | Make | Model | Trim | Drive | Fuel |
|---|---|---|---|---|---|
| 2014–2018 | Ram | 2500 | Big Horn | 4WD | DIESEL |
| 2014–2018 | Ram | 2500 | Laramie | 4WD | DIESEL |
| 2014–2018 | Ram | 2500 | Laramie Limited | 4WD | DIESEL |
| 2014–2018 | Ram | 2500 | Laramie Longhorn | 4WD | DIESEL |
| 2014–2015 | Ram | 2500 | Lone Star | 4WD | DIESEL |
| 2014–2018 | Ram | 2500 | Outdoorsman | Not specified | DIESEL |
| 2014–2018 | Ram | 2500 | SLT | 4WD | DIESEL |
| 2014–2018 | Ram | 2500 | ST | 4WD | DIESEL |
| 2014–2018 | Ram | 2500 | Tradesman | 4WD | DIESEL |
| 2016–2018 | Ram | 2500 | Limited | 4WD | DIESEL |
Important fitment notes
- For OE Air Ride systems only
Warranty
BDS warranty coverage is for the original retail purchaser with proof of purchase. BDS hard parts and bushings have lifetime replacement coverage; finish and normal wear are excluded.
BDS NX2 and BDS/FOX Performance Series shocks have limited lifetime coverage excluding normal wear and oil seals. At BDS’s discretion, qualifying leaking seals less than two years old may be considered for repair or replacement.
FOX proprietary shocks and coilovers follow FOX warranty terms rather than the BDS warranty. Qualifying leaking seals less than one year old may be considered; other FOX concerns follow the FOX service process.
Properly maintained ball joints and tie-rod ends less than three years old may qualify, subject to the manufacturer’s conditions.
Remedies are repair or replacement at BDS’s discretion. Eligible warranty ground shipping is covered; removal, installation, expedited freight and consequential costs are excluded.
Shipping & Returns
Shipping & Refund Policy
Shipping:
We ship across Canada. Orders are processed within 1–2 business days. Delivery within Canada typically takes 3–10 business days depending on location and carrier. Tracking information will be provided once your order ships.
Refunds & Returns:
Returns are accepted within 30 days of delivery. Items must be unused and in original packaging. Please review our full return policy for more details.
Damaged or Incorrect Items:
If you receive a damaged or incorrect item, please contact us within 5 days of delivery. Call or text 416-624-1357 or email sales@Niagarajeeps.ca so we can resolve the issue quickly.